Products

0

This 3-volume hands-on lab manual teaches basic analog and digital communication topics such as AM, FM, SNR Concepts, sampling, TDM, and delta-sigma modulation. Designed for NI ELVIS II/II+.

SKU: ni-labs-035 Categories: , Tag:

This complete 3-volume lab manual offers hands-on labs for teaching basic analog and digital communication topics such as AM, FM, SNR Concepts, sampling, TDM, and delta-sigma modulation. The Emona DATEx Add-on Board combines with the NI ELVIS platform, providing a foundation to assist the student in visualizing and better understanding the concepts. DATEx allows the student to see the intermediate steps and associated signals in the implementation of different modulation schemes. Access to the complete volume of the Emona DATEx add-on board lab manual is provided upon purchase of the product.

by
Emona Tims

LEARNING OBJECTIVES

 

  • Students develop a comprehensive understanding of advanced analog and digital telecommunication principles
  • Students utilize a suite of LabVIEW VIs to generate, view, and record signals from the DATEx add-on board
  • Students learn how to integrate DATEx hardware and LabVIEW software to create real telecommunication control systems

 

COURSE ALIGNMENT

 

Level University
Topic Telecommunications
Style Laboratory
Prerequisite Skills Basic knowledge of communication signals

INCLUDED COURSE LABS

An introduction to the NI ELVIS test equipment

This experiment introduces students to the NI ELVIS digital multimeter, variable DC power supplies, oscilloscope, and function generator.

An introduction to the DATEx experimental add-in module

This lab introduces students to the Emona DATEx experimental add-in module for the NI ELVIS, used to help students learn about communications and telecommunications principles.

An introduction to soft front panel control

This experiment introduces students to soft front-panel control of the NI ELVIS test equipment and the Emona DATEx experimental add-in module.

Using the Emona DATEx to model equations

This experiment will introduce students to modeling equations by using the Emona DATEx to implement two relatively simple equations.

Amplitude modulation (AM)

In this experiment students use the Emona DATEx to generate a real AM signal by implementing its mathematical model. Students will add a DC component to a pure sinewave to create a message signal then multiply it with another sinewave at a higher frequency (the carrier), then examine the AM signal using the scope and compare it to the original message.

Double Sideband (DSBSC) modulation

In this experiment students use the Emona DATEx to generate a real DSBSC signal by implementing its mathematical model by taking a pure sinewave (the message) that contains absolutely no DC and multiply it with another sinewave at a higher frequency (the carrier). Students examine the DSBSC signal using the scope and compare it to the original message.

Observations of AM and DSBSC signals in the frequency domain

In this experiment students use the Emona DATEx to generate a real AM and DSBSC signal then analyse the spectral elements of the two signals using the NI ELVIS Dynamic Signal Analyzer.

AM demodulation

In this experiment students use the Emona DATEx to generate an AM signal by implementing its mathematical model. Then students set-up an envelope detector using the Rectifier and RC LPF on the trainer’s Utilities module. Once done, students connect the AM signal to the envelope detector’s input and compare the
demodulated output to the original message and the AM signal’s envelope. Students also observe the effect that an over-modulated AM signal has on the envelope detector’s output.

Double Sideband DSBSC demodulation

In this experiment students use the Emona DATEx to generate a DSBSC signal by implementing its mathematical model, then set-up a product detector by implementing its mathematical model also. Once done, students connect the DSBSC signal to the product detector’s input and compare the demodulated output to the original message and the DSBSC signal’s envelopes. Finally, students observe the effect that a distorted DSBSC signal due to overloading has on the product detector’s output.

Single Sideband (SSB) modulation & demodulation

In this experiment students use the Emona DATEx to generate an SSB signal by implementing the mathematical model for the phasing method, then use a product detector (with a stolen carrier) to reproduce the message.

Frequency Modulation (FM)

In this experiment students generate a real FM signal using the VCO module on the Emona DATEx. First students set up the VCO module to output an unmodulated carrier at a known frequency, then observe the effect of frequency modulating its output with a squarewave then speech. Finally students use the NI ELVIS Dynamic Signal Analyzer to observe the spectral composition of an FM signal in the frequency domain and examine the distribution of power between its carrier and sidebands for different levels of modulation.

FM demodulation

In this experiment students use the Emona DATEx to generate an FM signal using a VCO, then set-up a zero-crossing detector and verify its operation for variations in the message’s amplitude.

Sampling & reconstruction

In this experiment students use the Emona DATEx to sample a message using natural sampling then a sample-and-hold scheme. Students then examine the sampled message in the frequency domain using the NI ELVIS Dynamic Signal Analyzer. Finally, students reconstruct the message from the sampled signal and examine the effect of aliasing.

PCM encoding

In this experiment students use the PCM Encoder module on the Emona DATEx to convert the following to PCM: a fixed DC voltage, a variable DC voltage and a continuously changing signal. In the process, students verify the operation of PCM encoding and investigate quantisation error.

PCM decoding

In this experiment students use the Emona DATEx to convert a sinewave and speech to a PCM data stream then convert it to a PAM signal using the PCM Decoder module. Students then recover the message using the Tuneable Low-pass filter module.

Bandwidth limiting and restoring digital signals

In this experiment students use the Emona DATEx to set up a PCM communications system, then model bandwidth limiting of the channel by introducing a low-pass filter. Students observe the effect of bandwidth limiting on the PCM data using a scope. Finally, students use a comparator to restore a digital signal and observe its limitations.

Amplitude Shift Keying (ASK)

In this experiment students use the Emona DATEx to generate an ASK signal using the switching method. Digital data for the message is modeled by the Sequence Generator module. Students then recover the data using a simple envelope detector and observe its distortion. Finally, students use a comparator to restore the data.

Frequency Shift Keying (FSK)

In this experiment students use the Emona DATEx to implement the VCO method of generating an FSK signal. Digital data for the message is modeled by the Sequence Generator module. Students then recover the data by using a filter to pick-out one of the sinewaves in the FSK signal and demodulate it using an envelope detector. Finally, students observe the demodulated FSK signal’s distortion and use a comparator to restore the data.

Binary Phase Shift Keying (BPSK)

In this experiment students use the Emona DATEx to generate a BPSK signal using the Multiplier module to implement its mathematical model. Digital data for the message is modeled by the Sequence Generator module. Students then recover the data using another Multiplier module and observe its distortion. Finally, students use a comparator to restore the data.

Quadrature Phase Shift Keying (QPSK)

In this experiment students use the Emona DATEx to generate a QPSK signal by implementing the mathematical model of QPSK. Once generated, students examine the QPSK signal using the scope. Then, students examine how phase discrimination using a product detector can be used to pick-out the data on one BPSK signal or the other.

Spread Spectrum - DSSS modulation & demodulation

In this experiment students use the Emona DATEx to generate a DSSS signal by implementing its mathematical model. Students then use a product detector (with a stolen carrier) to reproduce the message. Once done, students examine the importance of using the correct PN sequence for the local carrier and the difficulty of jamming DSSS signals.

Undersampling in Software Defined Radio

In this experiment students use the Emona DATEx to set up a bandwidth limited signal then use it to explore the difference in the spectral composition of a sampled signal produced using a variety of sampling frequencies above and below the Nyquist Sample Rate. Students then use undersampling to demodulate the bandwidth limited signal and recover the message. Finally, students explore the effects on the recovered message of mismatches between the modulated carrier’s bandwidth and the frequency used for undersampling.

AM and product detection of AM signals

Students use the Emona DATEx to generate a DSBSC signal then add a carrier to it afterwards. After adding the carrier, students make necessary phase adjustments using the kiss test to turn the DSBSC signal into an AM signal. Then, students use the product detector to recover the message from the AM signal.

Noise in AM communications

Students use the Emona DATEx to set-up an AM modulator. Then, they set-up an envelope detector and product detector that receive the AM signal via a bandwidth limited and noisy channel and make SNR measurements for three levels of channel noise. Both SNR figures are compared for noise performance of the two demodulators.

PCM and time division multiplexing (TDM)

Students use the Emona DATEx to set up a single-channel PCM communications system. Then, students activate the PCM Encoder and Decoder modules' TDM mode to transmit two sets of PCM data between the modules. Finally, students modify the set-up to transmit and reconstruct two signals to model a dual-channel TDMA telecommunication system.

An introduction to Armstrong's modulator

Students use the Emona DATEx to generate a DSBSC signal then insert a carrier at the same frequency as the carrier used to generate it. They will then adjust the inserted carrier for quadrature using the scope and hearing. Finally, the signal will be limited and filtered to convert it to PM.

Phase division modulation and demodulation

Students use the Emona DATEx to generate a real PDM signal using independent messages by implementing its mathematical model. Once generated, students will examine the effect of phase division multiplexing on bandwidth. After this, they will examine how phase discrimination using a product detector can be used to pick-out one message or the other.

Pulse-width modulation and demodulation

Students will set up a pulse-width modulator (PWM) using the Emona DATEx comparator module. The modulator is verified and observed in operation for an AC message signal.

Message translation and inversion

Students use the Emona DATEx to generate a DSBSC signal using a 1kHz sinewave for the message and a 2kHz sinewave for the carrier. The DSBSC signal's upper sideband is removed by adjusting a low-pass filter to isolate the inverted message.

Carrier acquisition using the phase-locked loop

Students use the Emona DATEx to generate an AM signal, then implement a phase-locked loop (PLL) to generate a local carrier that is synchronized to the AM signal's carrier.

Signal-to-noise ratio and eye diagrams

Students use the Emona DATEx to add noise to a message (a digital data signal). The signal will then be band-limited to model the type of noise-affected signal that is possible at the output of a receiver. Students use this signal for determining signal-to-noise ratio figures for a variety of noise levels and observe the effects of noise and band-limiting using Eye Diagrams.

Pulse code modulation and signal-to-noise distortion ration (SNDR)

Students use the Emona DATEx to set up a PCM communications system to determine the SNDR of the signal on the PCM decoder's output. Then, students complete the PCM system with the addition of a reconstruction filter and measure its SNDR.

ASK demodulation using product detection

Students use the Emona DATEx to generate an ASK signal using the switching method. Digital data for the message is modeled by the Sequence Generator module. Students then recover the data using a product detector and investigate the importance of carrier synchronization in product detection.

FSK generation (switching method) and demodulation

Students use the Emona DATEx to implement the switching method of generating an FSK signal. Digital data for the message is modeled by the Sequence Generator module. Students then recover the data by using a filter to pick-out one of the sinewaves in the FSK signal and demodulate it using an envelope detector.

NI ELVIS II/II+

NI ELVIS II/II+

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a versatile laboratory platform that enables educators to teach over 20 different courses across science and engineering departments. The NI ELVIS integrates 12 common lab instruments including an oscilloscope, function...


Learn more

LabVIEW

LabVIEW

LabVIEW is systems engineering software for applications that require test, measurement, and control with rapid access to hardware and data insights.


Learn more

Emona DATEx Add-On Board

Emona DATEx Add-On Board

The Emona DATEx Add-on Board is a plug and play telecommunications board that enables students to easily learn the fundamentals of modern communications theory.


Learn more

Detailed Requirements

Required Software

Download Academic Software, Learn About Software Licensing

  • NI LabVIEW (Requires license)
    • NI LabVIEW Modulation Toolkit (Requires license)
    • NI LabVIEW MathScript RT Module (Requires license)
    • NI ELVISmx 14.0 or later

Required Hardware

Purchase Engineering Education Products

Additional information

Manufacturer

Topic

Style

Discipline