Products

0

The Integrator Electronics Engineering hands-on labs teach fundamental electrical engineering concepts including resistance, inductance, and capacitance. Designed for NI ELVIS II/II+.

SKU: ni-labs-020 Categories: , Tag:

In these labs, students will build and interface with electronics circuitry to experimentally learn the fundamentals of circuits.The Integrator Electronics Engineering Add-On Board provides a hands-on platform for teaching fundamental electrical engineering concepts including resistance, inductance, and capacitance as well as basic electrical theory. The student is guided with step-by-step instructions to each of the 22 included labs and will use the educational board to assemble the electric circuits, make the required connections of power sources and meters, and conduct experiments with the studied circuits. The student will collect, display, and analyze data through the provided LabVIEW-based lab software. With these labs, students can learn the operating principles of RL, RC, and RLC circuits.

by
Integrator Ltd.

LEARNING OBJECTIVES

  • The student will experimentally learn basic electrical engineering concepts including power sources, resistance, inductance, capacitance, and transient circuits.
  • Students interact with NI ELVIS hardware and virtual instrumentation to quickly measure and analyze data from the add-on board circuitry.

 

COURSE ALIGNMENT

 

Level University
Topic Circuits and Electronics
Style Laboratory
Prerequisite Skills Basic circuits knowledge

INCLUDED COURSE LABS

Ohm’s law

Students experimentally verify Ohm’s Law for various currents and voltages in the circuit, plotting the I-V curve for a resistor as well as I-R of a constant voltage.

Kirchhoff’s circuit laws

Students experimentally verify Kirchhoff’s Current and Voltage Laws and measure the currents in various circuit branches and potential drops across the resistances.

Series connection of resistors

Students experimentally verify the calculation of the equivalent resistance for series-connected resistors.

Parallel connection of resistors

Students experimentally verify the calculation of the equivalent resistance for parallel-connected resistors.

Mixed (series and parallel) connection of resistors

Students experimentally verify the calculation of the equivalent resistance for mixed connection of resistors.

DC voltage source

Students experimentally determine the DC voltage source impedance and plot its external characteristic graph.

DC current source

Experimentally determine the DC current source impedance and plot its external characteristic graph.

AC circuit with active resistance

Students learn the main properties and operation modes of an AC circuit with a resistive load. Students also determine circuit components parameters and learn their influence on the circuit operation.

AC circuit with active and inductive reactances connected in series

Students learn the main properties and operation modes of an AC circuit with series connected resistor and inductor. Students also determine circuit components parameters and learn their influence on the circuit operation.

AC circuit with active and capacitive reactances connected in

Students learn the main properties and operation modes of an AC circuit with series connected resistor and capacitor. Students also determine circuit components parameters and learn their influence on the circuit operation.

AC circuit with active, inductive and capacitive reactances connected in series

Students learn the main properties and operation modes of an AC circuit with series connected resistor, inductor, and a capacitor. Students also determine circuit components parameters and learn their influence on the circuit operation.

Series connection of capacitors

Students complete experimental verification of the equivalent capacitance calculation for series connection of capacitors.

Parallel connection of capacitors

Students complete experimental verification of the equivalent capacitance calculation for parallel connection of capacitors.

Series connection of inductors

Students complete experimental verification of the equivalent inductance calculation for series connection of inductors.

Parallel connection of inductors

Students complete experimental verification of the equivalent inductance calculation for parallel connection of inductors.

Resonance in series RLC circuits

Students learn of resonance in AC circuits with a resistor, inductor, and capacitor connected in series.

Parallel resonance in AC circuits

Students learn of resonance in AC circuits with a resistor, inductor, and capacitor connected in parallel.

Inductively coupled coils

Students complete an experimental study of a circuit consisting of two inductively coupled coils (additive and subtractive polarities), testing the main concepts for series connection of inductive coils.

Single-phase transformer

Students complete an experimental study of a single-phase transformer in no load and short circuit modes, plotting the external characteristic.

Transient processes in linear RL circuits

Students complete an experimental study of transient processes in a circuit containing a series connected resistance and an inductor. Plotting the graphs i(t) and v(t).

Transient processes in linear RC circuits

Students complete an experimental study of transient processes in a circuit containing a series connected resistance and a capacitor. Plotting the graphs i(t) and v(t).

Transient processes in linear RLC circuits

Students complete an experimental study of transient processes in a circuit containing a series connected resistance, inductor, and a capacitor. Plotting the graphs i(t) and v(t) of the capacitor and inductor.

NI ELVIS II/II+

NI ELVIS II/II+

The NI Educational Laboratory Virtual Instrumentation Suite (NI ELVIS) is a versatile laboratory platform that enables educators to teach over 20 different courses across science and engineering departments. The NI ELVIS integrates 12 common lab instruments including an oscilloscope, function...


Learn more

Integrator Electronics Engineering Add-On Board

Integrator Electronics Engineering Add-On Board

The Integrator Electronics Engineering Add-On Board provides a hands-on platform for teaching fundamental electrical engineering concepts including resistance, inductance, and capacitance as well as basic electrical theory conducted on a printed circuit board.


Learn more

Detailed Requirements

Required Software

Download Academic Software, Learn About Software Licensing

  • NI ELVISmx 4.2.3 or later
  • Lab software (Installer included in the main download above)

Required Hardware

Purchase Engineering Education Products

  • NI ELVIS II / II+ - View Specifications
  • Integrator Electronics Engineering Add-On Board - User manual is included in the main download above

INSTRUCTOR RESOURCES

Instructor resources are available.

Get access

Additional information

Manufacturer

Topic

Style

Discipline