Skip to content

NI mioDAQ How To Series

NI mioDAQ is a USB data acquisition device that can measure +/-10 Volts, generate +/-10 Volt signals, and perform digital/counter functions. In this series, mioDAQ product experts show you how to use the various features of mioDAQ with software like NI FlexLogger Lite and NI LabVIEW.

How to set up NI mioDAQ hardware

How to measure 10 Volts with NI mioDAQ and NI FlexLogger Lite

How to crimp a ferrule on stranded wires for data acquisition hardware

How to install the strain relief back shells on NI mioDAQ devices

Install NI mioDAQ devices on a wall, DIN-rail, or metal panel using the panel mount accessory kit

How to install NI mioDAQ devices in a 19″ rack (1U) using the mounting kit for 19″ racks

How to install the NI-DAQmx driver to program NI DAQ hardware in C, C++, C# and more

How to install DAQmx support in Python for NI DAQ hardware like NI mioDAQ

How to download and install LabVIEW for use with NI mioDAQ devices and other NI DAQ hardware

How to install FlexLogger Lite for use with NI mioDAQ devices and other NI DAQ hardware

How to route the digital lines to a counter in mioDAQ and measure a quadrature encoder

How to set a digital line on mioDAQ to digital output using FlexLogger Lite

How to mount NI mioDAQ with zip-ties